E2660-CO-CO2

CO-СO2 Transmitter
E2660-CO-CO2
Features
  • Simultaneous CO and CO2 monitoring
  • Range 0...300 / 1000 ppm CO and 0...10 000 ppm CO2
  • Resolution 1 ppm CO and 1 ppm CO2
  • Two SPST relays option
  • 2 × 4-20 mA or 0-10 V, RS485
Description

CO-CO2 transmitter E2660-CO-CO2 is a member of PluraSens® family of multifunctional measurement instruments.

It is an excellent solution for underground parking garages. The device may be also used in other confined spaces, where potentially toxic concentration of carbon monoxide and carbon dioxide can accumulate.

For carbon monoxide detection, the instrument utilises an electrochemical gas sensor.  For carbon dioxide detection, the instrument utilises a photoacoustic gas sensor. Both sensors are fully calibrated and temperature compensated and with excellent repeatability, stability and long lifetime.

Two relays with closing contact (optional) may be used for remote signalling or concentration control. Two alarm set-points are user settable.

Two analog outputs and RS485 digital interface with industry standard Modbus RTU protocol can be used to connect the detector to safety or building automation systems.


Technical Data
Sensors type CO — electrochemical
CO2 — photoacoustic
Sampling method diffusion
Detection range 0...300/1000 ppm CO
0...10 000 ppm CO2
Resolution 1 ppm CO
1 ppm CO2
Sensor lifetime CO > 10 years (replaceable)
CO2 > 10 years (non replaceable)
Power supply 12...36 VDC (default),
24 VAC or 230 VAC as options
Digital interface RS485, Modbus RTU protocol
Analog outputs 2 × 4-20 mA / 0-10 V, user settable
Output relays (option) 2 × SPST relays (closing contact),
Enclosure grey ABS plastic, wall mount, IP65
Dimensions H90 × W145 × D50 mm
Operating conditions -20...+50 °C, 15...90 %RH for CO
-40...+60 °C, 0...100 %RH for CO2


Similar Products


E2610-CO - Carbon Monoxide detector
E2610-CO - Carbon Monoxide detector
  • Stable long-life electrochemical sensor
  • Range 0...200 or 0...1000 ppm CO
  • Resolution 1 ppm CO
  • Two SPDT relays
  • UART digital interface

E2608-CO - Carbon Monoxide Detector
E2608-CO - Carbon Monoxide Detector
  • Stable long-life electrochemical sensor
  • Range 0...300 or 0...1000 ppm CO
  • Resolution 1 ppm CO
  • Two SPST relays
  • 2 × 4-20 mA or 0-10 V, RS485

E2618-CO - Carbon Monoxide Transmitter
E2618-CO - Carbon Monoxide Transmitter
  • Stable long-life electrochemical sensor
  • Range 0...300 or 0...1000 ppm CO
  • Resolution 1 ppm CO
  • 2 × 4-20 mA or 0-10 V, RS485

E2630-CO - Carbon Monoxide Detector
E2630-CO - Carbon Monoxide Detector
  • Stable long-life electrochemical sensor
  • Range 0...200 or 0...1000 ppm CO
  • Resolution 1 ppm CO
  • Two SPDT relays
  • UART digital interface