E2658-C2H4

Flameproof Ethylene Detector
E2658-C2H4
Features
  • Suitable for ATEX Zones 2 and 22
  • Humidity compensated electrochemical sensor
  • Range 0...10 / 0...200 / 0...1500 ppm C2H4
  • Resolution 0,1 / 1 / 5 ppm C2H4
  • Two SPST relays option
  • 2 × 4-20 mA or 0-
Description

E2658 series is a new line of flameproof detectors and transmitters intended for use in ATEX Zones 2 and 22. 

E2658 series devices are based on PluraSens® multifunctional platform.

Ethylene detector-transmitter E2658-C2H4utilises a fully calibrated and temperature compensated electrochemical gas sensor with excellent repeatability, stability and long lifetime. Due to a special technical solution for humidity compensation (available as an option), the detector may be used even at humidity levels up to 100% RH.

Two relays with closing contact (optional) may be used for remote signalling or concentration control. Two alarm set-points are user settable.

Two analog outputs and RS485 digital interface with industry standard Modbus RTU protocol can be used to connect the detector to safety or building automation systems.


Technical Data
Calibration ethylene C2H4
Sensor type electrochemical
Sampling method diffusion
Detection range 0...10 ppm C2H4
0...200 ppm C2H4
0...1500 ppm C2H4
Resolution 0,1 / 1 / 5 ppm C2H4
Repeatability < 2 % of signal
Sensor lifetime 2 years
Power supply 12...36 VDC (default),
24 VAC or 230 VAC as options
Digital interface RS485, Modbus RTU protocol
Analog outputs 2 × 4-20 mA / 0-10 V, user settable
Output relays (option) 2 × SPST relays (closing contact),
Enclosure die-cast aluminium, wall mount, IP66
Dimensions H80 × W125 × D57 mm
Operating conditions -20...+50 °C, 15...90 %RH
safe areas and ATEX Zones 2 and 22


Similar Products


E2608-C2H4 - Ethylene Detector
E2608-C2H4 - Ethylene Detector
  • Humidity compensated electrochemical sensor
  • Range 0...10 / 0...200 / 0...1500 ppm C2H4
  • Resolution 0,1 / 1 / 1 ppm C2H4
  • Two SPST relays
  • 2 × 4-20 mA or 0-10 V, RS485

E2618-C2H4 - Ethylene Transmitter
E2618-C2H4 - Ethylene Transmitter
  • Humidity compensated electrochemical sensor
  • Range 0...10 / 0...200 / 0...1500 ppm C2H4
  • Resolution 0,1 / 1 / 5 ppm C2H4
  • 2 × 4-20 mA or 0-10 V, RS485

E2638-C2H4 - Ethylene Detector
E2638-C2H4 - Ethylene Detector
  • Humidity compensated electrochemical sensor
  • Range 0...10 / 0...200 / 0...1500 ppm C2H4
  • Resolution 0,1 / 1 / 5 ppm C2H4
  • Two SPST relays option
  • 2 × 4-20 mA or 0-10 V, RS485

E2648-C2H4 - Ethylene Detector
E2648-C2H4 - Ethylene Detector
  • Humidity compensated electrochemical sensor
  • Range 0...10 / 0...200 / 0...1500 ppm C2H4
  • Resolution 0,1 / 1 / 5 ppm C2H4
  • Two SPST relays option
  • 2 × 4-20 mA or 0-10 V, RS485