- Simultaneous CO and NO monitoring monitoring
- Range 0...300 / 1000 ppm CO and 0...250 ppm NO
- Resolution 1 ppm CO and 1 ppm NO
- Two SPST relays option
- 2 × 4-20 mA or 0-10 V, RS485
CO-NO transmitter E2660-CO-NO is a member of PluraSens® family of multifunctional measurement instruments.
It is an excellent solution for underground parkings. The device may be also used in boiler houses and other confined spaces, where potentially toxic concentration of carbon monoxide and nitric oxide can accumulate.
The instrument utilises fully calibrated and temperature compensated electrochemical gas sensors with excellent repeatability, stability and long lifetime.
Two relays with closing contact (optional) may be used for remote signalling or concentration control. Two alarm set-points are user settable.
Two analog outputs and RS485 digital interface with industry standard Modbus RTU protocol can be used to connect the detector to safety or building automation systems.
|Detection range||0...300 / 1000 ppm CO|
|0...250 ppm NO|
|Resolution||1 ppm CO|
|1 ppm NO|
|Sensor lifetime||CO > 10 years|
|NO > 12 months|
|Power supply||11...30 VDC, 24 VAC or 90...265 VAC|
|Digital interface||RS485, Modbus RTU protocol|
|Analog outputs||2 × 4-20 mA / 0-10 V, user settable|
|Output relays (option)||2 × SPST relays (closing contact),|
|Enclosure||light gray ABS plastic, wall mount, IP65|
|Dimensions||H90 × W145 × D50 mm|
|Operating conditions||-20...+50 °C, 0...85 %RH|