E2660-CO-NO2

Carbon Monoxide-Nitrogen Dioxide Transmitter
E2660-CO-NO2
Features
  • Simultaneous CO and NO2 monitoring
  • RS485 Modbus RTU digital interface
  • Two analog outputs 4-20 mA / 0-10 V
  • Easy-to-install IP65 protected enclosure
  • Attached or remote sensor
  • Two SPST relays option
  • Acoustic alarm option
Description

E2660-CO-NO2 detector-transmitter is an easy-to-use instrument intended for simultaneous monitoring of carbon monoxide and nitrogen dioxide concentration. It is an excellent solution for underground parkings. The device may be also used in boiler houses and other confined spaces, where potentially toxic concentration of carbon monoxide and nitrogen dioxide can accumulate.

The instrument utilises novel fully calibrated and temperature compensated electrochemical gas sensors with excellent repeatability, stability and long lifetime.

Two analog outputs and RS485 digital interface with industry standard Modbus RTU protocol can be used to connect the transmitter to safety or building automation systems.


Technical Data
Sensors type Electrochemical cell
Sampling method Diffusion
Detection ranges 0...300 ppm / 0...1000 ppm CO
0...20 ppm / 0...200 ppm NO2
Resolution 1 ppm vol CO
0,1 ppm NO2
Sensor lifetime > 2 years
Calibration interval 6 months
Power supply 12...36 VDC (default),
24 VAC or 230 VAC as options
Analog outputs two 4-20 mA / 0-10 V (user settable)
Enclosure grey ABS plastic, IP65
Dimensions H90 × W145 × D50 mm
Operating conditions -20...+50 °C, 15...90 %RH


Similar Products


E2608-NO2 - Nitrogen Dioxide Detector
E2608-NO2 - Nitrogen Dioxide Detector
  • Stable long-life electrochemical sensor
  • Range 0...20 or 0...200 ppm NO2
  • Resolution 0,1 ppm or 1 ppm NO2
  • Two SPST relays
  • 2 × 4-20 mA or 0-10 V, RS485

E2618-NO2 - Nitrogen Dioxide Transmitter
E2618-NO2 - Nitrogen Dioxide Transmitter
  • Stable long-life electrochemical sensor
  • Range 0...20 or 0...200 ppm NO2
  • Resolution 0,1 ppm or 1 ppm NO2
  • 2 × 4-20 mA or 0-10 V, RS485

E2630-NO2 - Nitrogen Dioxide Detector
E2630-NO2 - Nitrogen Dioxide Detector
  • Stable long-life electrochemical sensor
  • Range 0...10 ppm NO2
  • Resolution 0,1 ppm NO2
  • Two SPST relays
  • UART digital interface

E2638-NO2 - Nitrogen Dioxide Detector
E2638-NO2 - Nitrogen Dioxide Detector
  • Stable long-life electrochemical sensor
  • Range 0...20 or 0...200 ppm NO2
  • Resolution 0,1 ppm or 1 ppm NO2
  • Two SPST relays option
  • 2 × 4-20 mA or 0-10 V, RS485