- Stable long-life electrochemical sensor
- Range 0...20 or 0...100 ppm C2H4O
- Resolution 0,1 ppm or 1 ppm C2H4O
- Two SPST relays
- 2 × 4-20 mA or 0-10 V, RS485
Ethylene oxide detector-transmitter E2608-EtO is a member of new PluraSens® family of multifunctional measurement instruments.
Applications include chemical and polymer industry, medicine (hospital sterilization facilities) and other areas where leakage or generation of ethylene oxide is possible.
The instrument utilises a fully calibrated and temperature compensated electrochemical gas sensor with excellent repeatability, stability and long lifetime.
Two relays with closing contact may be used for remote signalling or ventilation control. Two alarm set-points are user settable.
Two analog outputs and RS485 digital interface with industry standard Modbus RTU protocol can be used to connect the detector to safety or building automation systems.
|Calibration||ethylene oxide C2H4O|
|Detection range||0...20 ppm C2H4O|
|Resolution||0,1 ppm C2H4O for 20 ppm range|
|1 ppm C2H4O for 100 ppm range|
|Repeatability||< 2 % of signal|
|Sensor lifetime||2 years|
|Power supply||11...30 VDC, 24 VAC or 90...265 VAC|
|Digital interface||RS485, Modbus RTU protocol|
|Analog outputs||2 × 4-20 mA / 0-10 V, user settable|
|Output relays||2 × SPST relays (closing contact),|
|250 VAC / 30 VDC, 5 A max|
|Enclosure||light grey ABS plastic, wall mount, IP65|
|Dimensions||H85 × W82 × D55 mm|
|Operating conditions||-20...+50 °C, 15...90 %RH|