Features
- Suitable for ATEX Zones 2 and 22
- Stable long-life electrochemical sensor
- Range 0...300 or 0...1000 ppm CO
- Resolution 1 ppm CO
- Two SPST relays option
- 2 × 4-20 mA or 0-10 V, RS485
Description
E2670 series is a new line of flameproof detectors-transmitters intended for use in ATEX Zones 2 and 22.
E2670 series devices are based on PluraSens® multifunctional platform.
Carbon monoxide transmitter E2670-CO utilises a fully calibrated and temperature compensated electrochemical gas sensor with excellent repeatability, stability and long lifetime.
Two relays with closing contact (optional) may be used for remote signalling or concentration control. Two alarm set-points are user settable.
Two analog outputs and RS485 digital interface with industry standard Modbus RTU protocol can be used to connect the detector to safety or building automation systems.
Technical Data
| Calibration | carbon monoxide CO |
| Sensor type | electrochemical |
| Sampling method | diffusion |
| Detection range | 0...300 ppm CO |
| 0...1000 ppm CO | |
| Resolution | 1 ppm CO |
| Sensor lifetime | > 10 years |
| Power supply | 12...36 VDC (default), |
| 24 VAC or 230 VAC as options | |
| Digital interface | RS485, Modbus RTU protocol |
| Analog outputs | 2 × 4-20 mA / 0-10 V, user settable |
| Output relays (option) | 2 × SPST relays (closing contact), |
| 250 VAC / 30 VDC, 5 A max | |
| Default alarm set-points | 25 ppm / 35 ppm CO |
| Enclosure | grey die-cast aluminium, wall mount, IP65 |
| Dimensions | H155 × W145 × D110 mm |
| Operating conditions | -20...+50 °C, 0...90 %RH |
| safe areas and ATEX Zones 2 and 22 |