Features
- Simultaneous detection of two gases
- Accurate and stable measurement
- Wall-mount IP65 protected housing
- Visual and acoustic alarms
- Two output relays for alarm / ventilation control
Description
The instrument utilizes novel fully calibrated and temperature compensated gas sensors with excellent repeatability, stability, and long lifetime.
Two relays RE1 and RE2 with switching contacts can be used to control alarm sirens, ventilation fans, shut-off valves, or other actuators for each sensor. The detector is equipped with a visual and acoustic alarm for each sensor. 24 VAC or 230 VAC power supply options are available.
Technical Data
| Sensor type | Depending on detected gases available are |
| Metal oxide sensors, | |
| Electrochemical sensors | |
| Sampling method | Diffusion |
| Power supply | 24 VDC/AC ±20% (default) |
| or 230 VAC (optional) | |
| Digital interface | UART |
| Relay outputs | 2 relays with switch-over contact per sensor, |
| 2 × SPDT, max 5 A, 30 VDC / 250 VAC | |
| Alarms | Blinking LEDs, buzzers 85 dB |
| Enclosure | Grey ABS, wall mount, protection class IP65 |
| Dimensions | H123 × W201 × D55 mm |
| Operating conditions | 15...95 %RH |
| Atmospheric pressure ±10% | |
| Non-Atex rated areas | |
| The temperature depends on the sensor. |
