E2218-DM

Duct mount humidity & temperature transmitter
E2218-DM
Features
  • Mountable into ventilation airducts
  • Relative/absolute humidity, dew point, T
  • Industrial IP65 protected enclosure
  • Two configurable 0-10 V / 4-20 mA outputs
  • RS485 Modbus RTU digital interface
Description

Humidity and temperature transmitter E2218-DM is a member of new PluraSens® family of multifunctional measurement instruments. The transmitter is intended for measurement of relative and absolute humidity, temperature and dew point value in air with high accuracy and stability in non-aggressive gases. 

E2218-DM features two freely configurable analog outputs 4-20 mA / 0-10 V and RS485 Modbus RTU interface for direct Fieldbus networking. The sensors are located at the tip of 200 mm long stem, intended for insertion into ventilation airducts.


Technical Data
Ranges 0...100 %RH, -40...+85 °C
Analog output option 2 × 3-wire 0-10 V or 4-20 mA, programmable
Output scale freely adjustable within measurement ranges
Resolution 0,01 %RH / 0,01 °C
Accuracy ±2,5 %RH, ±0,3 °C
±1,8 %RH / ±0,3 °C on request
Power supply 12...36 VDC (default)
24 VAC as option
Operating conditions -40...+85 °C, 0...99 %RH (non-condensing)
Electromagnetic compatibility (CE marking) according to 89-336-EEC and EN61326-1 requirements


Similar Products


E2227 - Interior humidity & temperature transmitter
E2227 - Interior humidity & temperature transmitter
  • Digital sensors with excellent repeatability and stability
  • Fully calibrated and temperature compensated
  • RS485 Modbus RTU interface
  • Two configurable 0-10 V / 4-20 mA outputs

E2228-DM - Duct mount humidity & temperature transmitter
E2228-DM - Duct mount humidity & temperature transmitter
  • Digital sensors with excellent repeatability and stability
  • Fully calibrated and temperature compensated
  • RS485 Modbus RTU interface
  • 0-10 V or 4-20 mA switchable analog output
  • Two relays for thermostat / hygrostat functionality

E2228 - Humidity & temperature transmitter
E2228 - Humidity & temperature transmitter
  • Digital sensors in miniature tube
  • Fully calibrated and temperature compensated
  • 0-10 V or 4-20 mA switchable analog output
  • RS485 Modbus RTU interface
  • Two relays for thermostat / hygrostat functionality

E2353 - Lumber moisture transmitter
E2353 - Lumber moisture transmitter
  • Long-lasting stainless steel screw electrodes
  • Timber temperature compensation
  • Two 0-10 V and 4-20 mA outputs
  • RS485 Modbus RTU digital interface