Features
  • Long-lasting stainless steel screw electrodes
  • Timber temperature compensation
  • Two 0-10 V and 4-20 mA outputs
  • RS485 Modbus RTU digital interface
Description
Lumber moisture transmitter E2353 is a member of new PluraSens® family of multifunctional measurement instruments. The transmitter is intended for the measurement of timber moisture during kiln drying.
Moisture content (MC) detection is based on the measurements of electrical conductivity. The device uses robust stainless steel screw electrodes and FEP insulated connection cable to ensure the stable operating under the harsh conditions in drying kilns. Options with different length of electrodes and/or cable are available.
 The device has two user configurable analog outputs and RS485 digital interface with industry standard Modbus RTU protocol to connect the transmitter to automation systems.
Technical Data
Measurement method conductivity measurement
Measurement range 7...20% MC at -40...+125 °C
Resolution 0,1 % MC
Accuracy < ±1% MC
Response time ~15 s
Power supply 11...30 VDC, nominal 12/24 VDC
Power consumption < 0,5 W
Analog outputs 2 × 4-20 mA / 0-10 V, user settable
Digital interface RS485, Modbus RTU protocol
Enclosure grey ABS plastic, wall mount, protection class IP65
Dimensions H82 × W80 × D55 mm
Cable connection industrial M12 connector, IP68
Electrode cable FEP insulated, -50...+200 °C, thermocompensated, length 5/10/15 m
Screw electrodes stainless steel, length 15 / 25 mm


Similar Products


E2227 - Interior humidity & temperature transmitter
E2227 - Interior humidity & temperature transmitter
  • Digital sensors with excellent repeatability and stability
  • Fully calibrated and temperature compensated
  • RS485 Modbus RTU interface
  • Two configurable 0-10 V / 4-20 mA outputs

E2228-DM - Duct mount humidity & temperature transmitter
E2228-DM - Duct mount humidity & temperature transmitter
  • Digital sensors with excellent repeatability and stability
  • Fully calibrated and temperature compensated
  • RS485 Modbus RTU interface
  • 0-10 V or 4-20 mA switchable analog output

E2228 - Heavy duty humidity & temperature transmitter
E2228 - Heavy duty humidity & temperature transmitter
  • 0-10 V or 4-20 mA switchable analog output
  • Digital sensors in miniature tube
  • Fully calibrated and temperature compensated
  • Two relays for thermostat / hygrostat functionality
  • RS485 Modbus RTU interface

E2218 - Humidity & temperature transmitter
E2218 - Humidity & temperature transmitter
  • Industrial IP65 protected enclosure
  • Two 0-10 V or 4-20 mA switchable analog outputs
  • RS485 Modbus RTU digital interface
  • Attached or remote probes