Features
- Stable long-life metal-oxide sensor
- Range 0...100% LEL or 0...500 ppm
- Resolution 0,1% LEL or 1 ppm
- Two SPDT relays
- UART digital interface
Description
Solvent vapor detector E2630-VOC is an easy-to-use instrument intended for solvent storages, painting chambers and other confined spaces, where toxic or potentially explosive concentration of volatile organic compounds can accumulate.
The instrument utilises a fully calibrated metal-oxide semiconductor gas sensor with excellent repeatability, stability and long lifetime.
According to user's preferences the detector can be ordered for either fire prevention (range 0...100% LEL) or for toxicity prevention (range 0...500 ppm).
Two relays with switch-over contact may be used for remote signalling or ventilation control. Flashing LED and internal buzzer give visual and sound alarms.
Technical Data
| Detected vapours | acetone, ethanol, toluene, xylene etc |
| Default calibration | toluene |
| Sensor type | metal-oxide semiconductor |
| Sampling method | diffusion |
| Detection range | 0...100% LEL |
| 0...500 ppm | |
| Resolution | 0,1% LEL for LEL range |
| 1 ppm for ppm range | |
| Sensor lifetime | > 5 years |
| Power supply | 24 VDC/AC ±20% (default) |
| or 230 VAC (optional) | |
| Digital interface | UART |
| Output relays | 2 x SPDT relays (switch-over contact) |
| 250 VAC / 30 VDC, 5 A max | |
| Alarms | blinking LED, buzzer 85 dB |
| Default alarm set-points | 10% LEL / 25% LEL |
| 100 ppm / 300 ppm | |
| Enclosure | grey ABS plastic, wall mount, IP65 |
| Dimensions | H90 × W145 × D55 mm |
| Operating conditions | -40…+70 °C, <95 %RH (non-condensing) |
